Skip to content
Tankless

Tankless Water Heater Error Codes: Common Causes and Fixes

Error codes look intimidating, but most of them point to a handful of common problems. Here's how to make sense of them.

By Covina Water Heater Pros · · 2 min read

Tankless Water Heater Error Codes: Common Causes and Fixes

Quick answer

Most tankless water heater error codes fall into a few categories: ignition or flame failure, gas supply problems, venting or air intake blockages, overheating caused by scale buildup, low water flow, and freezing or sensor faults. In hard-water areas like Covina, scale in the heat exchanger is one of the most frequent causes. Check your owner's manual for your brand's exact code meanings.

Need it fixed today? Call (626) ***-****

Common Error Categories

Every brand (Rinnai, Navien, Noritz, Rheem, Takagi and others) uses its own numbering, so always check your manual or the label inside the cover. But the causes behind the codes are similar across brands:

Problem typeTypical causes
Ignition / no flameGas valve closed, low gas pressure, dirty flame rod, failed igniter
Overheating / high exhaust tempScale buildup on the heat exchanger, blocked vent
Venting / air supplyBlocked intake or exhaust, wrong vent length, fan failure
Low flowClogged inlet filter, scale, faucet aerators
Sensor / thermistorFailed temperature sensor or wiring
CondensateClogged condensate line (condensing units)

Safe Things to Check First

  1. Write down the exact code on the display.
  2. Make sure the gas valve to the unit is open and other gas appliances work.
  3. Check the outside vent terminal for nests, leaves or debris.
  4. Clean the cold-water inlet filter screen (shut off water first).
  5. Reset the unit by turning power off for 30 seconds and back on.

Safety first: Don't open the sealed combustion chamber or work on gas components yourself.

Error code that won't go away?

Talk to a local Covina technician now. Honest advice, upfront pricing.

(626) ***-****

The Hard-Water Problem

In Covina, scale is the root cause behind many overheating and flow errors. Minerals coat the inside of the heat exchanger, so the unit can't transfer heat efficiently and overheats. An annual descale usually clears it up. Here's how descaling works.

Pro tip: If your unit shows a maintenance or scale reminder code, it's asking to be descaled. Don't ignore it. Prolonged scale can permanently damage the heat exchanger.

When to Call a Pro

If the code returns after a reset, the unit won't ignite, or you see repeated overheating errors, call a technician. We service all major tankless brands. See our water heater repair service.

This article is general information for Covina-area homeowners. Gas, venting and electrical work should be done by a licensed professional. For help with your specific water heater, call (626) ***-****.

Frequently Asked Questions

A repeating code usually means the underlying cause, like scale buildup, low gas pressure or a blocked vent, hasn't been fixed. A reset only clears the display.
Yes. Most units can be reset by turning the power off and on or pressing the power button. If the error returns, it needs service.
In hard-water areas like Covina, once a year for descaling and an inspection.

Tankless Unit Acting Up?

We repair and descale all major tankless brands in Covina.

Call (626) ***-****
Call Now Free Quote