Skip to content
Homeowner Tips

High Water Pressure and Your Water Heater

Strong water pressure feels great in the shower, but too much of it quietly shortens the life of everything connected to your plumbing.

By Covina Water Heater Pros · · 2 min read

High Water Pressure and Your Water Heater

Quick answer

Household water pressure should be between about 50 and 80 psi. Pressure above 80 psi can cause a water heater's relief valve to leak, stress the tank and connections, and damage fixtures and appliances. A pressure-reducing valve (PRV) on the main line controls it, and an expansion tank handles the extra pressure created when water heats.

Need it fixed today? Call (626) ***-****

Why Covina Homes Can Have High Pressure

City water pressure varies by elevation and location in the distribution system. Homes at lower elevations or near pump stations can see high street pressure. Many Covina homes have a PRV where the main line enters the house, but PRVs wear out, often after 10–15 years.

Signs of High Pressure

  • T&P relief valve dripping
  • Banging pipes (water hammer)
  • Toilets that run or refill on their own
  • Leaky faucets and short-lived appliance hoses
  • Spitting or noisy faucets

Not sure what's wrong with your water heater?

Talk to a local Covina technician now. Honest advice, upfront pricing.

(626) ***-****

How to Test Your Water Pressure

  1. Buy an inexpensive pressure gauge that screws onto a hose bib.
  2. Make sure no water is running in the house.
  3. Attach the gauge to an outdoor faucet and open the faucet fully.
  4. Read the gauge. Check again late at night when pressure is often highest.

Pro tip: Get a gauge with a lazy (max) needle. It records the highest pressure, including spikes during heating cycles.

Fixing It

  • Install or replace the PRV on the main line and set it to around 60–70 psi.
  • Install or recharge an expansion tank at the water heater.
  • Replace the T&P valve if it's been leaking.

We test pressure on every water heater call because high pressure is so often behind leaks and early failures. Call us to have it checked. See water heater repair.

This article is general information for Covina-area homeowners. Gas, venting and electrical work should be done by a licensed professional. For help with your specific water heater, call (626) ***-****.

Frequently Asked Questions

Between about 50 and 80 psi. Many plumbers recommend setting a PRV to around 60–70 psi.
Yes. It stresses the tank, connections and relief valve and can shorten the heater's lifespan.
Typically 10–15 years, though hard water can shorten that.

Think Your Pressure Is Too High?

We test pressure and install PRVs and expansion tanks.

Call (626) ***-****
Call Now Free Quote